Payment & Shipping Terms:
|Best Printing Speed:||45mm/s||Max. Printing Speed:||120mm/s|
|Max. Traveling Speed:||200mm/s||Construction:||Power-Coated Steel, Aluminum Casting For Motion Components, POM|
|Build Plate:||Tempered Glass Panel||Build Plate Leveling:||Factory Leveled, Manually|
|Extruder:||Geared Motor (1:10 Rate)||Stepper Motors:||1.8° Step Angle With 1/16 Micro-stepping|
|X Y Positioning Precision:||5.08 Microns||Z Positioning Precision:||1.25 Microns|
|Power Requirements:||100-240V, 50-60Hz (D600), 220-240V, 50-60Hz (D600 Pro)||Max. Power:||1000W (D600), 4000W (D600 Pro)|
|Screen:||4.3" Touch Screen||Control Chip:||ATmega 2560|
|Storage Media:||USB Disk||Connectivity:||USB|
|Software Bundle:||CreatWare Multi-language||Supported File Types:||STL, OBJ, AMF|
|Operating Systems:||Windows (7,8,10), Mac OS X||Outage Restored:||Save Data When Power Is Off|
|Filament Detection:||Pause Printing When Filament Run Out||Automatic Shut-down:||Turn Off The Power Automatically When Printing Is Complete|
|Product Dimensions & Weight:||915*845*1085mm 125Kg||Packing Size & Weight:||1000*1030*1360mm 190Kg (Pallet)|
CreatBot D600 Large 3D Printer with 4.3" Touch Screen
Filament & Application
We supply high quality CreatBot filament. The models below are commissioned by the cultural relics protection organization and printed by D600 with 5kg big roll of PLA within 80 hours. No extra cares or change filament.
Temperature Up to 420°C
D600 and D600 Pro equiped with the 4th generation dual extruders and hotends. The left extruder equiped with 260°C hotend, it is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right extruder 420°C hotend is made of martensite steel, which is able to print high performance materials. The dual hotend is replaceable, which provide more possibility on your application.
We exclusively research and develop the extruder feeding system support high-speed printing, and accuracy can reach high to 0.05mm, it allows to extrude filament steady without block.
The whole-steel body not only ensure the stability when printing but alst greatly extend the usage period. the optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 5 years and more than 8000 hours
Huge Build Volume
D600 is a real industrial level 3D printer, it can print largest build volume of 600*600*600mm, 30 times bigger than it of other ordinary 3D printer in nowadays mass market.
Auto leveling Platform ( D600 Pro)
Use of 25 points through the BL-Touch probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and save the print data, lower the working platform and withdraw filament when the power off suddenly.
Easy Touch Screen
The printer has a 4.3" touch screen, more easy to operate. We also provide One-Key to preheat, print, home as well as other shortcut keys.
The platform surface is attached with the 3D printing special stickers, and the printer has vertical thermal conductivity so that can support high thermal efficiency. You can set the parameters to turn off the hot bed automatically after the specified number of layers.
1. Hot air chamber can provide constant room temperature so that model won’t deform when printing.
2. The function is able to dry filaments like Nylon,PC,ABS, which with high water absorption, 45°C and 65°C chamber temperature available.
Fully Enclosed Chamber
The fully enclosed chamber can block all external interference. Also this frame can reduce noises, at the same time to provide constant temperature, so that the model won't deform
Contact Person: Elena
Tel: +86 184 3905 0876